GLASS TEMPERING FURNANCE

-
 -
-
TEMPERING FURNANCE FOR FLAT GLASS

 

 

Tempering furnance for flat glass is mainly used for production of flat temepring glass for curtain wall of architecture with jumbo size, household electrical application, vehicles and furnishing.

- T Type of Passing throuh Chiller Section - Glass passes a high pressure chiller section rapidly and moves to a cooling chiller section of low pressure after going out of heating chamber, which gets a better chilling effect. This type is especially suitable for tempering of thin glass.

- S Type of Dual- or Multi- Chamber Glass Tempering Furnace - A preheating chamber is set in front of heating chamber, into which glass goes before enters heating chamber, so enhances productivity by average of 50%-80%.

- D Type of Glass Tempering Furnace by Means of Heating of Convection - This type of equipment enables glass heating more homogenous and is specially used for production of tempering Low-E glass, various coated glass, screenprinted glass and high quality of flat and/or bent tempered glass.

- L Type of Continuous Heating Glass Tempering Furnace - Because of lengthening wiht the furnace body, the glass itself is not necessarily to be heated by a reciprocating way. This type of furnace is suitable for production of orders with big quantity and/or orders of no much change wiht glass thickness.

Model
Max.Glass Size
(mm)

Output
m2/h

Glass Thickness
(mm)
 Installed Power(kW)
 Heating & Driving  Blower
AG-T-GT1307 1300*700 16 4~19 72 55
AG-T-GT1610 1600*1000 29 4~19 120 75
AG-T-GT2110 2100*1000 38 4~19 155 110
AG-T-GT2212 2200*1200 48 4~19 195 132
AG-T-GT2415 2400*1500 65 4~19 265 162
AG-T-GT3015 3000*1500 81 4~19 326 162
AG-T-GT3017 3000*1700 92 4~19 368 162
AG-T-GT3320 3250*2000 117 4~19 465 197
AG-T-GT3621 3660*2150 142 4~19 564 265
AG-T-GT3624 3660*2440 160 4~19 637 295
AG-T-GT5024 5000*2440 210 4~19 844 325
AG-T-GT6024 6000*2440 250 4~19 910 360
AG-T-GT6030 6000*3000 310 5~19 948 325


TEMPERING FURNANCE FOR THIN FLAT GLASS

- B Type of Tempering Furnance for Thin Flat Glass - Mainly used for production of thin tempering glass for automobile, household electrical appliances, high-grade furnishing, bath room, doors & windows, inlaying decoration and wall of indooe division

Model
Max.Glass Size
(mm)

Output
m2/h

Glass Thickness
(mm)
 Installed Power(kw)
 Heating & Driving  Blower
AG-T-GTB1307 1300*700 16 3,2~19 80 147
AG-T-GTB1610 1600*1000 29 3,2~19

130

265
AG-T-GTB1807 1800*700 24 3,2~19 105 215
AG-T-GTB2110 2100*1000 38 3,2~19 160 245
AG-T-GTB2212 2200*1200 48 3,2~19 200 294
AG-T-GTB2415 2400*1500 65 3,2~19 265 350
AG-T-GTB3015 3000*1500 81 3,2~19 330 350
AG-T-GTB3017 3000*1700 92 3,2~19 370 425
AG-T-GTB3220 3250*2000 117 3,2~19 470 475
AG-T-GTB3612 3660*1200 77 3,2~19 330 394
AG-T-GTB4012 4000*1200 88 3,2~19 365 309
AG-T-GTB4015 4000*1500 107 3,2~19 450 395

LATERAL BENDING GLASS TEMPERING FURNANCE

Model
max.Glass Size

(mm)

min. Radius

(mm)

Tickness (mm)

Capacity (batch/hr)
AG-T-GTW2410H 1000*800 500 4-12 14
AG-T-GTW2412H 1220*1000 500 4-12 14
AG-T-GTW2415H 1524*1000 500 4-12 14
AG-T-GTW3621H 2134*1000 500 5-12 14
AG-T-GTW3624H 2440*1000 500 5-12 14

 


LONGITUDINAL BENDING GLASS TEMPERING FURNANCE

Model
max.Glass Size

(mm)

min. Radius

(mm)

Tickness (mm)

Capacity (batch/hr)
AG-T-GTW2110Z 2134*1000 650 4-12 14
AG-T-GTW2212Z 2200*1220 800 4-12 14
AG-T-GTW2412Z 2440*1220 800 4-12 14
AG-T-GTW2415Z 2440*1524 1000 5-12 14
AG-T-GTW3621Z 3660*2134 1300 4-19 14
AG-T-GTW3624Z 3660*2440 1500 4-19 14
AG-T-GTW5024Z 5000*2440 1500 4-19 14
AG-T-GTW6030Z 6000*3000 2000 5-19 14

 


FLAT & LATERAL BENDING TWO-WAY GLASS TEMPERING FURNANCE 

 

 

This type of tempering equipment is constituted by means of adding a lateral bending quenching section on the base of flat glass tempering furnance. With this type of equipment, both flat and bending glass can be produced. Mainly used for flat and/or bending tempered glass production of windoscreen for various vehicle, architectural decoration, household electrical appliances, doos & windows as well as wall of indoor division ets.

Model
max. size of flat glass
(mm)

min.Radius of bending glass
(mm)

Tickness
(mm)
AG-T-GT1612H

1600*1200

1600*1200 4~12
AG-T-GT2415H

2440*1500

1550*1500 4~12
AG-T-GT3621H

 3660*2150

2150*1500 4~12
AG-T-GT3624H

 3660*2440

2440*1500 4~12
AG-T-GT5024H 5000*2440 2440*1500 4~12
AG-T-GT6024H 6000*2440 2440*1500 4~12
AG-T-GT8024H 8000*2400 2440*1500 4~12



FLAT & LONGITUDINAL BENDING TWO-WAY GLASS TEMPERING FURNANCE

 

This type of tempering equipment is constituted by means of adding a lateral bending quenching section on the base of flat glass tempering furnance. With this type of equipment, both flat and bending glass can be produced. Mainly used for production of bending tempered glass with jumbo size for construction.

Model
max. size of flat glass
(mm)

min.Radius of bending glass
(mm)

Tickness
(mm)
AG-T-GT3621Z

3660*2150

3660*2150 6~19
AG-T-GT3624Z

3660*2440

3660*2440 6~19
AG-T-GT5024Z

5000*2440

5000*2440 6~19
AG-T-GT6024Z 6000*2440 5000*2440 6~19
AG-T-GT6030Z

6000*3000

5000*3000 6~19
AG-T-GT6033Z 6000*3300 5000*3300 6~19
AG-T-GT8024Z 8000*2440 5000*2440 6~19
AG-T-GT8033Z 8000*3300 5000*3300 6~19
AG-T-GT9033Z 9000*3300 5000*3300 6~19